Description
This project has been in the works for more than a minute and we apologize for the delay bringing this to life. The TiStem for the Arizer ArGo is made in the US from Grade 2 Pure Titanium. It has been milled from a rod into what you see here. The Surface Finish is a Fade from the Polished base of the stem to Satin as you go up towards the mouthpiece. We are producing this in two variants: 1) Standard 4 Hole Chamber like OEM Arizer Glass Stems 2) HiFlo One Hitter Style with a wide open single hole.
What's the difference between the chamber variants? There is a ≈30% area increase with the larger holed variant (less restriction vs smaller holes). Smaller holes will clog faster and easier while the single hole will allow more debris through easily. We wanted to create a larger One Hitter option at the same time we created the Titanium ArGo Stem, so we decided to go with both setups. As ArGo enthusiasts, we know that we are not alone chasing flavor from this device and there are times when we just kram in an unground flower with glass BackSpacers (or not).
These are available in Limited Quantities. HiFlo are only available at this point, the 4 Hole variant are sold out. We will not be producing another batch until we know whether or not Arizer will continue to use this variant of glassware with an ArGo 2 or ArGo MAX, whatever nomenclature they come up with on the successor. This has not been announced but we hope to see a refreshed Arizer ArGo in 2023, fingers crossed...
For anyone picking up any of the remaining HiFlo, we'll include a 10 pack of the Bulk Solo/Air screens to keep everything in the chamber and just the high flowing. The titanium walls are thinner than glass, so the OEM & bulk ArGo screens will fall out with your flowers when emptying.
Weight: ≈ 13g
