Description
IPR System Integrated: YES
PCB/PCM Compatible: YES
Low Voltage Activation: YES
USB Input Power Regulator: Automated
Charge Rate: 2A (Power Adapter dependent, we recommend using 1A or less for best long term wear of cells)
Battery Size Compatibility: ALL up to 71mm
Compatible Chemistry: Li-ion (3.6V / 3.7V)
Simplicity in a single-slot form. We present Hohm SCHOOL UNO. It combines the charging capability of its bigger brother Hohm SCHOOL2 but combines that power into 1 single slot. That is 2000mA (2A output) of single-cell charging speed. We did not go with 3A as this often accelerates cell degradation and reduces cycle life. 2A charging is a speedy yet conscientious charging speed for today’s lithium-ion cells. There is no need for a screen on this charger. It is 100% autonomous. It is equipped with the IPR System*1, which automates the step-up/down output to match the power adapter that supplies the power. Whether you use an older 0.5A or a newer 2A (or greater) power supply/adapter, the Hohm SCHOOLUNO will do a proper job. Even li-ion batteries with or without PCB/PCM*2 are easily balanced to the correct voltage. This ensures today’s small li-ion batteries’ chemistry integrity is not compromised, allowing them to get the cycle life they deserve.
Applying forward-thinking to safety & performance, we integrated input power regulation. This is safety 101 here. This allows the charger to not stress or damage USB adapters no matter which power supply is used. The fact is simple: today’s li-ion batteries need precise voltage and amperage delivery to ensure long reliable performance & life…Say hello to Hohm SCHOOL UNO, the smarter single-slot charger.
Equipped with:
> IPR System – no more stressing USB power adapters or ports
> Low-Voltage Activation – If a cell has low voltage and is not charging on other chargers, let this charger go to work for you.
> Compatible with ALL li-ion cells from as short as 30mm to as long as 71mm
> LED indicator that reports color and blink variation for quick/easy readout
> PCB/PCM*3 compatible so even protected cells aren’t left out in the cold
> Protection 101: A] Short circuit; B] PCB overheat C] Reverse polarity; D] Over-charge prevention
Every Hohm Tech product is tested and certified by the rightful authorities/laboratories and accredited entities to achieve Compliance & Certification of: IEC 62133 2nd Edition, UN38.3, PSE, CE, ROHS, FCC, Air/Sea Transport, and is backed by Industry Leading PLI. We do not cut corners. We deliver what we promise… chart-topping performance, capacity, consistency, and safety.
*1 Input Power Regulator
*2 Protection Circuit Board/Module
*3 Volt Recognition @ 2.9V
Hohm Alone Battery not included with Charger, shown for display purposes only.
WARNING: Know your battery & charger warning & safety information
Consult a certified lithium-ion specialist or certified battery pack assembler if there are any uncertainties or questions on the use of, handling of, installation of, charging of, or storage of lithium-ion batteries. Consumer safety is of utmost importance.
