Stuck between the OEM Arizer Aroma Tube glass length and the Extended? So were we!
Available in 5 Variants:
- Straight 72mm 3D Flow (≈OEM glassware size)
- Straight 88mm 3D Flow
- Curved 88mm 3D Flow
- Curved 88mm 3D Flow UltraDry (with Air Port)
- Straight 105mm 3D Flow Extended
The Curve is a big part of what we like about our Solo2/Air2 glass, but nobody had a solution for a curved piece of ArGo glass until now. We've also incorporated the 1st 3D Flow design into ArGo glass in straight glass and curved variant. The 3D Flow indentations absorb/deflect fine material which may pull thru the glass screen as well as cooling the air upon redirection along the pathway. Curved variant with 3D Flow enhances these properties and will not roll away on you on a uneven surface. New UltraDry variant includes an Air Port for additional cooling and fresh air integration.
The chamber portion of the glass is clear and ≈ the same dimensions as the OEM glass/screen setup.
We've added some color on what is exposed from the ArGo and kept 35mm of the base clear for optimal fit in the chamber. Made from Borosilicate Glass.
105mm Straight variant will not fit inside the ArGo inside the Small StashCase, it is a tight fit if you place it aside of the ArGo in the StashCase, but shock & impact could damage the glassware in this setup.
Want to Cap the Mouthpiece end of these? Also ideal for storage in the ArGo in our Small StashCase, we recommend using the OEM Arizer Stem Cap On Both Ends for storage of prepacked stems, or just the mouthpiece end if in the device.
⚠️Working ArGo glass shows stress cracks which are unavoidable. This is the nature of glassware as it is handmade. Please be aware of this potential when purchasing this glassware.
Device shown and additional gear for scale, not included with glass purchase